This post contains affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.
A cane holder is a small clip or bracket that keeps a walking cane in place, either on the edge of a table or desk or on the frame of a walker, rollator or wheelchair, so the cane doesn’t fall or have to be leaned against something.
Part of our Adaptive Daily Living series, which covers tools that make everyday tasks easier to do independently.
Anyone who uses a cane knows the routine: you sit down, lean the cane on the table, and a minute later it slides to the floor. Bending to pick it up is the last thing you want to do. A cane holder fixes that, but there are two quite different kinds. Some clip to a table edge or chair back, and others fasten to the frame of a walker, rollator or wheelchair. I went through retailer listings and sorted the options by where they attach, which cane sizes they fit and price, and I picked five.
Here’s what I’m covering below:
- The two kinds of cane holder
- A quick comparison of the five picks
- Full reviews with who each is best for
- Other options
- How to choose
- Answers to common questions
I haven’t tested these myself. The details below come from retailer listings and their reviews, so check the current listing before you buy.
Quick Comparison
| Product | Attaches To | Price (listed) | Best For |
|---|---|---|---|
| Alex Orthopedic Compact Desk/Table Clip | Table or desk edge | About $5 | Best budget table clip |
| Ingrid Ultimate Cane Clip Holder | Table edge, chair back or belt | About $16 | Best for flat and curved surfaces |
| Triumph Mobility Universal Cane Holder | Walker, rollator or wheelchair (Velcro) | About $28 | Best Velcro mobility holder |
| Essential Aids Cane Holder | Wheelchair, rollator or walking frame | About £6 (UK) | Best for holding the tip as well as the shaft |
| Eclive Walking Stick Holder | Walker, wheelchair, rollator or scooter (clamp) | About $10 | Best low-cost clamp |
What Actually Matters
- Where you need it. A table clip helps at restaurants, desks and kitchen tables. A frame holder helps when you carry a cane on a walker, rollator or wheelchair. Many people need one of each.
- Cane thickness. Some clips fit only thin shafts. One table clip lists a maximum of 16 mm, and reviewers say wider canes can slip off. Measure your cane before you order.
- Tube size on the frame. Frame holders list the tube or cane diameter they fit. Check it against your walker or wheelchair.
- How it attaches. Velcro straps, clamps and snap-on clips all work, but a clamp needs a tube it can grip and a spring clip can be tight to open if your hands are stiff.
- Holding the tip. A cane held only by the shaft can swing. A holder that also catches the tip keeps the cane still while you move.
- Safety. Keep the cane where it won’t stick out into a walkway. If your cane doesn’t feel the right height, ask your doctor or physical therapist to check it.
The 5 Best Cane Holders
1. Alex Orthopedic Compact Desk/Table Clip
Price: About $5 | Attaches to: Table or desk edge
A spring clip that hooks onto a table or desk edge. The cane can hang from the edge, or stand with its tip on the floor and the clip slid up under the tabletop. The listing says it holds only up to a 16 mm cane shaft. One cane shop’s listing showed 3.7 stars from 129 reviews, and reviewers say it works better on thinner canes and may slip off wider ones. Some found the spring tight to open.
Why it’s a top pick: The lowest price of the five.
Best for: Restaurants, desks and tables when you use a thin cane.
2. Ingrid Ultimate Cane Clip Holder
Price: About $16 | Attaches to: Table edge, countertop, chair back or belt
A clip that hangs a cane on a table, desk or countertop edge, and also on curved surfaces such as the back of a chair. The hook can hang the cane from a belt too. It comes in black, chrome and white, with a 6-month limited warranty. A cane shop’s listing showed 4.3 stars from 120 reviews, with reviewers saying it works well on chair backs and table edges but less well on thick surfaces. Every color showed as unavailable when I looked, so confirm stock.
Why it’s a top pick: It handles both flat and curved surfaces.
Best for: People who sit at different kinds of tables and chairs.
3. Triumph Mobility Universal Cane Holder
Price: About $28 | Attaches to: Walker, rollator or wheelchair
A Velcro-mounted cane holder for walkers, wheelchairs and rollators, with adjustable placement. It weighs about 0.2 lb. The listing had no reviews yet. It also says the holder comes in a pack of 2 in one place but doesn’t mention a pack in the price, so check the quantity before you buy.
Why it’s a top pick: Velcro means no tools, and the placement is adjustable.
Best for: Walker and rollator users who want to carry a cane on the frame.
4. Essential Aids Cane Holder
Price: About £6 (UK retailer) | Attaches to: Wheelchair, rollator or walking frame
A holder with two fixing points: an upper clip for the shaft and a lower part that holds the rubber tip. The listing says it can also be used with a crutch. It weighs about 115 g. This is a UK retailer with a pack of three available, and the stock status was unclear.
Why it’s a top pick: It holds the tip as well as the shaft, so the cane stays still.
Best for: Wheelchair and rollator users who want the cane held at two points.
5. Eclive Walking Stick Holder
Price: About $10 | Attaches to: Walker, wheelchair, rollator or scooter
A clamp-on bracket for round or oval tubing that fits canes from about 0.86 to 1.41 inches in diameter. The listing says it needs no drilling, though another description mentions screws, so check what is in the box. It had no ratings yet and is sold by a marketplace seller.
Why it’s a top pick: A low price and a stated fit range.
Best for: A first try on a walker or scooter.
Other Options
- CaneTUBE Cane Holder uses snap-on clips and a strap for walkers, rollators and wheelchairs. It was listed at about $28 with one review and was out of stock.
Who Else Benefits
- Walker, rollator and wheelchair users who carry a backup cane
- People who use a cane at restaurants, offices and waiting rooms
- Caregivers tidying up around someone who uses a cane
- People with tremors or limited grip, who may also like our guides to weighted and two-handled mugs and rocker knives
How to Choose
- Cheap table clip: pick 1, if your cane is thin.
- Tables and chairs: pick 2.
- Walker or rollator, no tools: pick 3.
- Cane held at two points: pick 4.
- Low-cost clamp: pick 5.
Frequently Asked Questions
What is a cane holder?
A cane holder is a small clip or bracket that keeps a walking cane in place on a table edge or on the frame of a walker, rollator or wheelchair.
How do I stop my cane from falling over when I sit?
A table clip holds the cane on the edge of a table or desk, and a chair-back clip holds it on the back of a chair. Leaning a cane against a wall or table with no holder is what makes it slide.
Will a cane holder fit my walker or wheelchair?
It depends on the frame tube size and the cane diameter. Check both measurements against the listing before ordering.
Do cane holders work with thick canes?
Some clips fit only thin shafts, and reviewers report wider canes slipping off. Look for a stated maximum diameter.
Can I use a cane holder with a crutch?
Some can. One holder lists crutch use, but check each listing for its supported sizes.
Final Thoughts
A good cane holder is small, but it saves you from bending down every time the cane falls. Measure your cane and your frame first, then pick the kind that fits where you sit most. For general advice on choosing and using canes and walkers, see the Health in Aging tip sheet on canes and walkers.